Skip to main content
Version: v1.22.x LTS

API Mediation Layer onboarding configuration

Last updated
:  |
0 min read
|
Edit this page
 PDF
 Open doc issue

This article describes the process of configuring a REST service to onboard with the Zowe API Mediation Layer using the API ML Plain Java Enabler. As a service developer, you can provide basic configuration of a service to onboard to the API ML. You can also externalize configuration parameters for subsequent customization by a systems administrator.

Introduction#

The API ML Plain Java Enabler (PJE) is a library which helps to simplify the process of onboarding a REST service with the API ML. This article describes how to provide and externalize the Zowe API ML onboarding configuration of your REST service using the PJE.

Note: For more information about specific configuration parameters and their possible values, and the service registration process, see the specific documentation of the onboarding approach you are using for your project:

The PJE is the most universal Zowe API ML enabler. This enabler uses only Java, and does not use advanced Inversion of Control (IoC) or Dependency Injection (DI) technologies. The PJE enables you to onboard any REST service implemented in Java, avoiding dependencies, versions collisions, unexpected application behavior, and unnecessarily large service executables.

Service developers provide onboarding configuration as part of the service source code. While this configuration is valid for the development system environment, it is likely to be different for an automated integration environment. Typically, system administrators need to deploy a service on multiple sites that have different system environments and requirements such as security.

The PJE supports both the service developer and the system administrator with the functionality of externalizing the service onboarding configuration.

The PJE provides a mechanism to load API ML onboarding service configuration from one or two YAML files.

Configuring a REST service for API ML onboarding#

In most cases, the API ML Discovery Service, Gateway, and service endpoint addresses are not known at the time of building the service executables. Similarly, security material such as certificates, private/public keys, and their corresponding passwords depend on the specific deployment environment, and are not intended to be publicly accessible. Therefore, to provide a higher level of flexibility, the PJE implements routines to build service onboarding configuration by locating and loading one or two YAML file sources:

  • internal service-configuration.yml

    The first configuration file is typically internal to the service deployment artifact. This file must be accessible on the service classpath. This file contains basic API ML configuration based on values known at development time. Usually, this basic API ML configuration is provided by the service developer and is located in the /resources folder of the Java project source tree. This file is usually found in the deployment artifacts under /WEB-INF/classes. The configuration contained in this file is provided by the service developer or builder. As such, it will not match every possible production environment and its corresponding requirements.

  • external or additional service-configuration.yml

    The second configuration file is used to externalize the configuration. This file can be stored anywhere on the local file system, as long as that the service has access to that location. This file is provided by the service deployer/system administrator and contains the correct parameter values for the specific production environment.

At service start-up time, both YAML configuration files are merged, where the externalized configuration (if provided) has higher priority.

The values of parameters in both files can be rewritten by Java system properties or servlet context parameters that were defined during service installation/configuration, or at start-up time.

In the YAML file, standard rewriting placeholders for parameter values use the following format:

${apiml.parameter.key}

The actual values are taken from [key, value] pairs defined as Java system properties or servlet context parameters. The system properties can be provided directly on a command line. The servlet context parameters can be provided in the service web.xml or in an external file.

The specific approach of how to provide the servlet context to the user service application depends on the application loading mechanism and the specific Java servlet container environment.

Example:

If the service is deployed in a Tomcat servlet container, you can configure the context by placing an XML file with the same name as the application deployment unit into _$CATALINA_BASE/conf/[enginename]/[hostname]/_.

Other containers provide different mechanisms for the same purpose.

Plain Java Enabler service onboarding API#

You can initialize your service onboarding configuration using different methods of the Plain Java Enabler class ApiMediationServiceConfigReader:

Automatic initialization of the onboarding configuration by a single method call#

The following code block shows automatic initialization of the onboarding configuration by a single method call:

public ApiMediationServiceConfig initializeAPIMLConfiguration(ServletContext context);

This method receives the ServletContext parameter, which holds a map of parameters that provide all necessary information for building the onboarding configuration. The following code block is an example of Java Servlet context configuration.

Example:

<Context>
<Parameter name="apiml.config.location" value="/service-config.yml"/>
<!-- Relative path to configuration file:
<Parameter name="apiml.config.additional-location" value="../conf/Catalina/localhost/apiml-plugin-poc_plain-java-enabler.yml" />
-->
<Parameter name="apiml.config.additional-location" value="/home/pin/bin/apache-tomcat-9.0.14/conf/Catalina/localhost/apiml-plugin-poc_plain-java-enabler.yml" />
<Parameter name="apiml.serviceId" value="discopin" />
<Parameter name="apiml.serviceIpAddress" value="127.0.0.2" />
<Parameter name="apiml.discoveryService.hostname" value="localhost" />
<Parameter name="apiml.discoveryService.port" value="10011" />
<Parameter name="apiml.ssl.enabled" value="true" />
<Parameter name="apiml.ssl.verifySslCertificatesOfServices" value="true" />
<Parameter name="apiml.ssl.keyPassword" value="password" />
<Parameter name="apiml.ssl.keystore.password" value="password" />
<Parameter name="apiml.ssl.truststore.password" value="password" />
<Parameter name="apiml.ssl.keystore" value="../keystore/localhost/localhost.truststore.p12" />
<Parameter name="apiml.ssl.truststore" value="../keystore/localhost/localhost.truststore.p12" />
</Context>

Where the two parameters corresponding to the location of the configuration files are:

  • apiml.config.location

    This parameter describes the location of the basic configuration file.

  • apiml.config.additional-location

    This parameter describes the location of the external configuration file.

    The method in this example uses the provided configuration file names in order to load them as YAML files into the internal Java configuration object of type ApiMediationServiceConfig.

    The other context parameters with the apiml prefix are used to rewrite values of properties in the configuration files.

Validating successful onboarding with the API Mediation Layer#

Ensure that you successfully onboarded a service with the API Mediation Layer.

Follow these steps:

  1. Validate successful onboarding

  2. Check that you can access your API service endpoints through the Gateway.

  3. (Optional) Check that you can access your API service endpoints directly outside of the Gateway.

    Loading YAML configuration files#

YAML configuration files can be loaded either as a single YAML file, or by merging two YAML files. Use the loadConfiguration method described later in this article that corresponds to your service requirements.

After successfully loading a configuration file, the loading method loadConfiguration uses Java system properties to substitute corresponding configuration properties.

Loading a single YAML configuration file#

To build your configuration from multiple sources, load a single configuration file, and then rewrite parameters as needed using values from another configuration source. See: Loading and merging two YAML configuration files described later in this article.

Use the following method to load a single YAML configuration file:

public ApiMediationServiceConfig loadConfiguration(String configurationFileName);

This method receives a single String parameter and can be used to load an internal or an external configuration file.

Note: This method first attempts to load the configuration as a Java resource. If the file is not found, the method attempts to resolve the file name as an absolute. If the file name still cannot be found, this method attempts to resolve the file as a relative path. When the file is found, the method loads the contents of the file and maps them to internal data classes. After loading the configuration file, the method attempts to substitute/rewrite configuration property values with corresponding Java System properties.

Loading and merging two YAML configuration files#

To load and merge two configuration files, use the following method:

public ApiMediationServiceConfig loadConfiguration(String internalConfigurationFileName, String externalizedConfigurationFileName)

where:

  • String internalConfigurationFileName

    references the basic configuration file name.

  • String externalizedConfigurationFileName

    references the external configuration file name.

Note: The external configuration file takes precedence over the basic configuration file in order to match the target deployment environment. After loading and before merging, each configuration will be separately patched using Java System properties.

The following code block presents an example of how to load and merge onboarding configuration from YAML files.

Example:

@Slf4j
public class ApiDiscoveryListener implements ServletContextListener {
/**
* @{link ApiMediationClient} instance used to register and unregister the service with API ML Discovery service.
*/
private ApiMediationClient apiMediationClient;
/**
* Creates {@link ApiMediationServiceConfig}
* Creates and initializes {@link ApiMediationClient} instance, which is then used to register this service
* with API ML discovery service. The registration method of ApiMediationClientImpl catches all RuntimeExceptions
* and only can throw {@link ServiceDefinitionException} checked exception.
*
* @param sce
*/
@Override
public void contextInitialized(ServletContextEvent sce) {
ServletContext context = sce.getServletContext();
/*
* Call loadConfiguration method with both config file names initialized above.
*/
ApiMediationServiceConfig defaultConfig = new ApiMediationServiceConfigReader().initializeAPIMLConfiguration(context);
/*
* Instantiate {@link ApiMediationClientImpl} which is used to un/register the service with API ML Discovery service.
*/
apiMediationClient = new ApiMediationClientImpl();
/*
* Call the {@link ApiMediationClient} instance to register your REST service with API ML Discovery service.
*/
try {
apiMediationClient.register(defaultConfig);
} catch (ServiceDefinitionException sde) {
log.error("Service configuration failed. Check log for previous errors: ", sde);
}
}
/**
* If apiMediationClient is not null, attmpts to unregister this service from API ML registry.
*/
@Override
public void contextDestroyed(ServletContextEvent sce) {
if (apiMediationClient != null) {
apiMediationClient.unregister();
}
}
}

On this page