Skip to main content
Version: v1.22.x LTS

Creating and configuring the Zowe instance directory

Last updated
:  |
0 min read
|
Edit this page
 PDF
 Open doc issue

The Zowe instance directory or <INSTANCE_DIRECTORY> contains configuration data required to launch a Zowe runtime. This includes port numbers, location of dependent runtimes such as Java, Node, z/OSMF, as well as log files. When Zowe is started, configuration data will be read from files in the instance directory and logs will be written to files in the instance directory.

Note: The creation of an instance directory will set default values for users who want to run all Zowe z/OS components. If you are using Docker, you must make a small configuration change to disable the components on z/OS that will instead run in Docker.

Introduction#

The purpose of the instance directory is to hold information in the z/OS File System (zFS) that is created (such as log files) or modified (such as preferences) or configured (such as port numbers) away from the zFS runtime directory for Zowe. This allows the runtime directory to be read-only and to be replaced when a new Zowe release is installed, with customizations being preserved in the instance directory.

Multiple instance directories can be created and used to launch independent Zowe runtimes from the same Zowe runtime directory.

The Zowe instance directory contains a file instance.env that stores the Zowe configuration data. The data is read each time Zowe is started. You can modify instance.env to configure the Zowe runtime. See Updating the instance.env configuration file for more information.

Alternatively, from v1.22.0 release, you can use a YAML format configuration file zowe.yaml instead of instance.env to configure the Zowe runtime. See Updating the zowe.yaml configuration file (Technical Preview) for more information.

The instance directory <INSTANCE_DIRECTORY>/bin contains other key scripts as follows:

  • zowe-start.sh is used to start the Zowe runtime by launching the ZWESVSTC started task.
  • zowe-stop.sh is used to stop the Zowe runtime by terminating the ZWESVSTC started task.
  • zowe-support.sh can be used to capture diagnostics around the Zowe runtime for troubleshooting and off-line problem determination, see Capturing diagnostics to assist problem determination.

High availability considerations:

  • If you plan to run Zowe in Sysplex for high availability, the instance directory should be placed in a shared USS file system. This way, all Zowe instances within the Sysplex can read and write to the same instance directory.
  • zowe.yaml is required if you want to start Zowe in high availability mode.

Prerequisites#

Before creating an instance directory, ensure that you have created a keystore directory that contains the Zowe certificate. See Creating Zowe certificates for instructions. Also, ensure that you have already configured the z/OS environment. See Configuring the z/OS system for Zowe for instructions.

Creating an instance directory#

To create an instance directory, use the zowe-configure-instance.sh script.

Navigate to the Zowe runtime directory <RUNTIME_DIR> and execute the following commands:

<RUNTIME_DIR>/bin/zowe-configure-instance.sh -c <PATH_TO_INSTANCE_DIR>

If you have an instance directory that is created from a previous release of Zowe 1.8 or later and are installing a newer release of Zowe, then you should run zowe-configure-instance.sh -c <PATH_TO_INSTANCE_DIR> pointing to the existing instance directory to have it updated with any new values. The release documentation for each new release will specify when this is required, and the file manifest.json within each instance directory contains information for which Zowe release it was created from.

In order to allow the ZWESVSTC started task to have permission to access the contents of the <INSTANCE_DIR> the zowe-configure-instance.sh script sets the group ownership of the top level directory and its child to be ZWEADMIN. If a different group is used for the ZWESVSTC started task you can specify this with the optional -g argument, for example.

<RUNTIME_DIR>/bin/zowe-configure-instance.sh -c <PATH_TO_INSTANCE_DIR> -g <GROUP>

Updating the instance.env configuration file#

To operate Zowe, a number of zFS folders need to be located for prerequisites on the platform. Default values are selected when you run zowe-configure-instance.sh. You might want to modify the values.

Contents in this section

Zowe prerequisites#

  • JAVA_HOME: The path where 64-bit Java 8 or later is installed. Only needs to be specified if not already set as a shell variable. Defaults to /usr/lpp/java/J8.0_64.

  • NODE_HOME: The path to the Node.js runtime. Only needs to be specified if not already set as a shell variable.

  • ROOT_DIR: The directory where the Zowe runtime is located, also referred to as the <RUNTIME_DIR>. Defaults to the location of where zowe-configure-instance was executed.

  • ZOSMF_PORT: The port used by z/OSMF REST services. Defaults to value determined through running netstat.

  • ZOSMF_HOST: The host name of the z/OSMF REST API services.

  • ZOWE_EXPLORER_HOST: The hostname of where the Explorer servers are launched from. Defaults to running hostname -c. Ensure that this host name is externally accessible from clients who want to use Zowe as well as internally accessible from z/OS itself.

  • ZOWE_IP_ADDRESS: The IP address of your z/OS system which must be externally accessible to clients who want to use Zowe. This is important to verify for IBM Z Development & Test Environment and cloud systems, where the default that is determined through running ping and dig on z/OS returns a different IP address from the external address.

Domain, Hostname and IP Address#

  • ZOWE_EXPLORER_HOST: The hostname of where the Explorer servers are launched from. Defaults to running hostname -c. Ensure that this host name is externally accessible from clients who want to use Zowe as well as internally accessible from z/OS itself.
  • ZOWE_IP_ADDRESS: The IP address of your z/OS system which must be externally accessible to clients who want to use Zowe. This is important to verify for IBM Z Development & Test Environment and cloud systems, where the default that is determined through running ping and dig on z/OS returns a different IP address from the external address.

When configuring a Zowe instance through the instance.env file, ZOWE_IP_ADDRESS and ZOWE_EXPLORER_HOST are used to specify where the Zowe servers can be reached.

However, these values may not reflect the website name that you access Zowe from. This is especially true in the following cases:

  • You are using a proxy
  • The URL is a derivative of the value of ZOWE_EXPLORER_HOST, such as myhost versus myhost.mycompany.com

In these cases, it may be necessary to specify a value for ZWE_EXTERNAL_HOSTS in the form of a comma-separated list of the addresses from which you want to access Zowe in your browser.

In the previous example, ZWE_EXTERNAL_HOSTS could include both myhost and myhost.mycompany.com. In the instance.env, this would look like: ZWE_EXTERNAL_HOSTS=myhost,myhost.mycompany.com

This configuration value maybe used for multiple purposes, including referrer-based security checks. In the case that the values are not specified, referrer checks will use the default values of ZOWE_IP_ADDRESS, ZOWE_EXPLORER_HOST, and the system's hostname. Therefore, if these values are not what you put into your browser, you will want to specify ZWE_EXTERNAL_HOSTS to set the correct value.

  • ZOWE_EXPLORER_FRAME_ANCESTORS: The MVS, USS, and JES Explorer are served by their respective explorer UI address spaces. These are accessed through the Zowe desktop where they are hosted as iFrames. To protect against double iFrame security vulnerabilities, browsers all of the valid address that may be used by the browser must be explicitly declared in this property. The default values are: "${ZOWE_EXPLORER_HOST}:*,${ZOWE_IP_ADDRESS}:*". If there are any other URLs by which the Zowe Explorers can be served, then these should be appended to the preceding comma-separated list.

Component groups#

LAUNCH_COMPONENT_GROUPS: This is a comma-separated list of which z/OS microservice groups are started when Zowe launches.

  • GATEWAY will start the API mediation layer that includes the API catalog, the API gateway, and the API discovery service. These three address spaces are Apache Tomcat servers and use the version of Java on z/OS as determined by the JAVA_HOME value. In addition to the mediation layer, the z/OS Explorer services are included here as well.
  • DESKTOP will start the Zowe desktop that is the browser GUI for hosting Zowe applications such as the 3270 Terminal emulator or the File Explorer. It will also start ZSS. The Zowe desktop is a node application and uses the version specified by the NODE_HOME value.
  • ZSS will start the ZSS server without including the Desktop and Application Framework server. This can be used with Docker so that you do not run servers on z/OS that will already be running within Docker. This may also be useful if you want to utilize ZSS core features or plug-ins without needing the Desktop. ZSS is a pre-requisite for the Zowe desktop, so when the DESKTOP group is specified then the zss server will be implicitly started. For more information on the zssServer and the technology stack of the Zowe servers see Zowe architecture.
  • Vendor products may extend Zowe with their own component group that they want to be lifecycled by the Zowe ZWESVSTC started task and run as a Zowe sub address space. To do this, specify the fully qualified directory provided by the vendor that contains their Zowe extension scripts. This directory will contain a start.sh script (required) that is called when the ZWESVSTC started task is launched, a configure.sh script (optional) that performs any configuration steps such as adding iFrame plug-ins to the Zowe desktop, and a validate.sh script (optional) that can be used to perform any pre-launch validation such as checking system prerequisites. For more information about how a vendor can extend Zowe with a sub address space, see the Extending section.

Note: If you are using Docker, it is recommended to remove GATEWAY and DESKTOP from LAUNCH_COMPONENT_GROUPS by setting LAUNCH_COMPONENT_GROUPS=ZSS. This will prevent duplication of servers running both in Docker and on z/OS. Technical Preview

Keystore configuration#

  • KEYSTORE_DIRECTORY: This is a path to a zFS directory containing the certificate that Zowe uses to identify itself and encrypt https:// traffic to its clients accessing REST APIs or web pages. This also contains a truststore used to hold the public keys of any z/OS services that Zowe is communicating to, such as z/OSMF. The keystore directory must be created the first time Zowe is installed onto a z/OS system and it can be shared between different Zowe runtimes. For more information about how to create a keystore directory, see Configuring Zowe certificates.

Address space names#

Individual address spaces for different Zowe instances and their subcomponents can be distinguished from each other in RMF records or SDSF views by specifying how they are named. Address space names are 8 characters long and made up of a prefix ZOWE_PREFIX, instance ZOWE_INSTANCE followed by an identifier for each subcomponent.

  • ZOWE_PREFIX: This defines a prefix for Zowe address space STC names. Defaults to ZWE.

  • ZOWE_INSTANCE: This is appended to the ZOWE_PREFIX to build up the address space name. Defaults to 1

  • A subcomponent will be one of the following values:

    • AC - API ML Catalog
    • AD - API ML Discovery Service
    • AG - API ML Gateway
    • DS - App Server
    • EF - Explorer API Data Sets
    • EJ - Explorer API Jobs
    • SZ - ZSS Server
    • UD - Explorer UI Data Sets
    • UJ - Explorer UI Jobs
    • UU - Explorer UI USS

The STC name of the main started task is ZOWE_PREFIX+ZOWE_INSTANCE+SV.

Example:

ZOWE_PREFIX=ZWE
ZOWE_INSTANCE=X

the first instance of Zowe API ML Gateway identifier will be as follows:

ZWEXAG

Note: If the address space names are not assigned correctly for each subcomponents, check that the step Configure address space job naming has been performed correctly for the z/OS user ID ZWESVUSR.

Ports#

When Zowe starts, a number of its microservices need to be given port numbers that these microservices use to provide access to their services. You can leave default values for components that are not in use. The two most important port numbers are the GATEWAY_PORT which is for access to the API Gateway through which REST APIs can be viewed and accessed, and ZOWE_ZLUX_SERVER_HTTPS_PORT which is used to deliver content to client web browsers logging in to the Zowe desktop. All of the other ports are not typically used by clients and used for intra-service communication by Zowe.

  • CATALOG_PORT: The port the API Catalog service will use. Used when LAUNCH_COMPONENT_GROUPS includes GATEWAY.
  • DISCOVERY_PORT: The port the discovery service will use. Used when LAUNCH_COMPONENT_GROUPS includes GATEWAY.
  • GATEWAY_PORT: The port the API gateway service will use. Used when LAUNCH_COMPONENT_GROUPS includes GATEWAY. This port is used by REST API clients to access z/OS services through the API mediation layer, so should be accessible to these clients. This is also the port used to log on to the API catalog web page through a browser.
  • JOBS_API_PORT: The port the jobs API service will use. Used when LAUNCH_COMPONENT_GROUPS includes GATEWAY.
  • FILES_API_PORT: The port the files API service will use. Used when LAUNCH_COMPONENT_GROUPS includes GATEWAY.
  • JES_EXPLORER_UI_PORT: The port the jes-explorer UI service will use. Used when LAUNCH_COMPONENT_GROUPS includes GATEWAY.
  • MVS_EXPLORER_UI_PORT: The port the mvs-explorer UI service will use. Used when LAUNCH_COMPONENT_GROUPS`` includes GATEWAY.
  • USS_EXPLORER_UI_PORT: The port the uss-explorer UI service will use. Used when LAUNCH_COMPONENT_GROUPS includes GATEWAY.
  • ZOWE_ZLUX_SERVER_HTTPS_PORT: The port used by the Zowe desktop. Used when LAUNCH_COMPONENT_GROUPS includes DESKTOP. It should be accessible to client machines with browsers wanting to log on to the Zowe desktop.
  • ZOWE_ZSS_SERVER_PORT: This port is used by the ZSS server. Used when LAUNCH_COMPONENT_GROUPS includes DESKTOP or ZSS.

Note: If all of the default port values are acceptable, the ports do not need to be changed. To allocate ports for the Zowe runtime servers, ensure that the ports are not in use.

To determine which ports are not available, follow these steps:

  1. Display the list of ports that are in use with the following command:

    TSO NETSTAT

  2. Display the list of reserved ports with the following command:

    TSO NETSTAT PORTLIST

Terminal ports#

Note: Unlike the ports needed by the Zowe runtime for its Zowe Application Framework and z/OS Services which must be unused, the terminal ports are expected to be in use.

  • ZOWE_ZLUX_SSH_PORT: The Zowe desktop contains an application VT Terminal which opens a terminal to z/OS inside the Zowe desktop web page. This port is the number used by the z/OS SSH service and defaults to 22. The USS command netstat -b | grep SSHD1 can be used to display the SSH port used on a z/OS system.
  • ZOWE_ZLUX_TELNET_PORT: The Zowe desktop contains an application 3270 Terminal which opens a 3270 emulator inside the Zowe desktop web page. This port is the number used by the z/OS telnet service and defaults to 23. The USS command netstat -b | grep TN3270 can be used to display the telnet port used on a z/OS system.
  • ZOWE_ZLUX_SECURITY_TYPE: The 3270 Terminal application needs to know whether the telnet service is using tls or telnet for security. The default value is blank for telnet.

API Mediation Layer configuration#

The following parameters can be set to customize the configuration of all API Mediation Layer components:

  • APIML_DEBUG_MODE_ENABLED : When this parameter is set to true, detailed logging of activity by the API mediation layer occurs. This can be useful to diagnose unexpected behavior of the API gateway, API discovery, or API catalog services. Default value is false.

The following parameters can be set to customize the configuration of the Discovery:

  • ZWE_DISCOVERY_SERVICES_LIST: A comma-separated list of the endpoints for each Discovery Service instance. The default value is https://${ZOWE_EXPLORER_HOST}:${DISCOVERY_PORT}/eureka/.

The following parameters can be set to customize the configuration of the Gateway:

  • APIML_ALLOW_ENCODED_SLASHES: When this parameter is set to true, the Gateway allows encoded characters to be part of URL requests redirected through the Gateway.
  • APIML_CORS_ENABLED: When this parameter is set to true, CORS are enabled in the API Gateway for Gateway routes api/v1/gateway/**.
  • APIML_PREFER_IP_ADDRESS: Set this parameter to true to advertise a service IP address instead of its hostname. Note, this configuration is deprecated. Zowe start script will ignore this value and always set it to false.
  • APIML_GATEWAY_TIMEOUT_MILLIS: Specifies the timeout for connection to the services in milliseconds.
  • APIML_SECURITY_X509_ENABLED: Set this parameter to true, to enable the client certificate authentication functionality through ZSS.
  • APIML_SECURITY_ZOSMF_APPLID: The z/OSMF APPLID used for PassTicket.
  • APIML_SECURITY_AUTH_PROVIDER: The authentication provider used by the API Gateway. By default, the API Gateway uses z/OSMF as an authentication provider. It is possible to switch to SAF as the authentication provider instead of z/OSMF.

The following values are used to customize the configuration of Caching Service.

  • ZWE_CACHING_SERVICE_PORT=7555: The port the Caching Service will use.
  • ZWE_CACHING_SERVICE_PERSISTENT=: This field sets the storage type used to persist data in the Caching Service. Valid options are REDIS or VSAM. REDIS is currently only supported as an off-Z storage solution. VSAM is only supported on Z.
  • ZWE_CACHING_SERVICE_VSAM_DATASET: This field sets the VSAM dataset name to be used to store Caching Service data. This field is required if ZWE_CACHING_SERVICE_PERSISTENT is set to VSAM, otherwise this field is not needed.

Refer to detailed section about API Gateway configuration

Cross memory server#

  • ZOWE_ZSS_XMEM_SERVER_NAME: For the Zowe Desktop to operate communication with the Zowe cross memory server. The default procedure name ZWESIS_STD is used for the cross memory server. However, this can be changed in the ZWESISTC PROBLIC member. This might occur to match local naming standards, or to allow isolated testing of a new version of the cross memory server while an older version is running concurrently. The Zowe desktop that runs under the ZWESVSTC started task will locate the appropriate cross memory server running under its started task ZWESISTC using the ZOWE_ZSS_XMEM_SERVER_NAME value. If this handshake cannot occur, users will be unable to log in to the Zowe desktop. See Troubleshooting: ZSS server unable to communicate with X-MEM.

    //ZWESISTC PROC NAME='ZWESIS_STD',MEM=00,RGN=0M

Extensions#

  • ZWEAD_EXTERNAL_STATIC_DEF_DIRECTORIES: Full USS path to the directory that contains static API Mediation Layer .yml definition files. For more information, see Onboard a REST API without code changes required. Multiple paths should be semicolon separated. This value allows a Zowe instance to be configured so that the API Mediation Layer can be extended by third party REST API and web UI servers.
  • EXTERNAL_COMPONENTS: For third-party extenders to add the full path to the directory that contains their component lifecycle scripts. For more information, see Zowe lifecycle - Zowe extensions.
  • ZWE_DISCOVERY_SERVICES_LIST: (Work in progress) Do not modify this value from its supplied default of https://${ZOWE_EXPLORER_HOST}:${DISCOVERY_PORT}/eureka/.
  • ZWE_CACHING_SERVICE_PORT=7555: (Work in progress) This port is not yet used so the value does not need to be availale.
  • ZWE_CACHING_SERVICE_PERSISTENT: (Work in progress) This is used to set the storage type used to persist cached data. Valid options are REDIS or VSAM.
  • ZWE_CACHING_SERVICE_VSAM_DATASET: (Work in progress)

Updating the zowe.yaml configuration file (Technical Preview)#

Technical Preview

Note: This feature is added with Zowe v1.22.0 release for technical preview and we are happy to hear any feedback. Content in this section may be changed or improved in the future.

Instead of using instance.env to configure the Zowe runtime, you can also use a zowe.yaml file to configure Zowe in more granular level. zowe.yaml is also required to start Zowe in high availability mode. To make Zowe runtime recognize the zowe.yaml configuration, you must create a zowe.yaml file and remove the instance.env file from the instance directory. See Creating the zowe.yaml file for instructions.

Note: In the following sections, we refer configuration keys with concatenation of key names and dots. For example, if you want to update the configuration key zowe.internalCertificate.keystore.type with value PKCS12, you should set value for this entry in the zowe.yaml:

zowe:
internalCertificate:
keystore:
type: PKCS12

To learn more about the YAML format, please visit yaml.org.

Contents in this section

Known limitations for Zowe high availability#

  • To allow Sysplex Distributor to route traffic to Gateway, you can only start one Gateway in each LPAR within the Sysplex. All Gateways instances should be started on the same port configured on Sysplex Distributor.
  • Zowe App Server should be accessed through Gateway with URL like https://<dvipa-domain>:<external-port>/zlux/ui/v1.
  • Currently, the app-server component can only be configured to start one instance.
  • If you enabled more than one Discovery service, you may see a 500 error if you click on the Refresh Static APIs button from API Catalog.

Creating the zowe.yaml file#

There are two ways to create a zowe.yaml file.

  • Copy the example file <instance-dir>/bin/example-zowe.yaml to <instance-dir>/zowe.yaml and modify it based on your configuration.

  • Convert from an existing instance.env file by using a utility tool in <instance-dir>/bin/utils/convert-to-zowe-yaml.sh shipped with Zowe. Issue the following command to convert an instance.env file to zowe.yaml format:

    <instance-dir>/bin/utils/convert-to-zowe-yaml.sh <instance-dir>/instance.env <instance-dir>/zowe.yaml

    where, the <instance-dir> is your instance directory path.

After zowe.yaml is created, you should add new haInstances section and define ha-instance(s) you want to start in your Sysplex.

High level overview of YAML configuration file#

The YAML configuration file has few high level sections:

  • zowe: defines global configurations specific to Zowe, including default values.
  • java: defines Java configurations used by Zowe components.
  • node: defines node.js configurations used by Zowe components.
  • zOSMF: tells Zowe your z/OSMF configurations.
  • components: defines detailed configurations for each Zowe component or extension. Each component or extension may have a key entry under this section. For example, components.gateway is configuration for API Mediation Layer Gateway service.
  • haInstances: defines customized configurations for each High Availability (HA) instance. You should predefine all Zowe HA instances you want to start within your Sysplex.

Extract sharable configuration out of zowe.yaml#

The Zowe YAML configuration file supports a special @include annotation that can be used in any level of the configuration. This enables you to organize your YAML configuration files and extract sharable configurations to a separate YAML file.

For example, you can define a sharable certificate configuration file <keystore-dir>/zowe-certificates.yaml like this:

keystore:
alias: localhost
password: password
file: /global/zowe/keystore/localhost/localhost.keystore.p12
type: PKCS12
trustStore:
file: /global/zowe/keystore/localhost/localhost.truststore.p12
certificateAuthorities: ""
pem:
key: /global/zowe/keystore/localhost/localhost.keystore.key
certificate: /global/zowe/keystore/localhost/localhost.keystore.cer-ebcdic
certificateAuthority: /global/zowe/keystore/local_ca/localca.cer-ebcdic

Then in your <instance-dir>/zowe.yaml, you can import this certification file like this:

zowe:
externalCertificate:
@include: "<keystore-dir>/zowe-certificates.yaml"
internalCertificate:
@include: "<keystore-dir>/zowe-certificates.yaml"

Configuration override#

Inside zowe.yaml, you can define default values and they may be overridden in more granular level configurations. This can happen in several ways:

  • Component can override default certificate configuration. For specific entry of certification configuration, if it's not overridden, it will fall back to default configurations. For example, in this configuration:

    zowe:
    internalCertificate:
    keystore:
    alias: localhost
    password: password
    file: /global/zowe/keystore/localhost/localhost.keystore.p12
    type: PKCS12
    trustStore:
    file: /global/zowe/keystore/localhost/localhost.truststore.p12
    certificateAuthorities: ""
    pem:
    key: /global/zowe/keystore/localhost/localhost.keystore.key
    certificate: /global/zowe/keystore/localhost/localhost.keystore.cer-ebcdic
    certificateAuthority: /global/zowe/keystore/local_ca/localca.cer-ebcdic
    components:
    app-server:
    certificate:
    keystore:
    alias: app-server
    pem:
    key: /global/zowe/keystore/localhost/localhost.keystore.app-server.key
    certificate: /global/zowe/keystore/localhost/localhost.keystore.app-server.cer-ebcdic

    App Server will use the certificate alias app-server instead of localhost from the same keystore defined in zowe.internalCertificate.keystore.file. And it will use the exact same truststore defined in zowe.internalCertificate.trustStore.file.

  • HA instance component configuration haInstances.<ha-instance>.components.<component> can override global level component configurations components.<component>. Any configuration you can find in components.<component> level can be overridden in haInstances.<ha-instance>.components.<component> level. For example, in this configuration:

    components:
    app-server:
    enabled: true
    port: 8544
    haInstances:
    lpar2a:
    components:
    app-server:
    enabled: false
    lpar2b:
    components:
    app-server:
    port: 28544

    App Server on lpar2a HA instance will not be started. On lpar2b HA instance, it will be started but on port 28544.

YAML configurations - certificate#

In Zowe YAML configuration, certificate definition shares the same format and this format can be used in several configuration entries. For example, zowe.externalCertificate, zowe.internalCertificate, components.<component>.certificate, and haInstances.<ha-instance>.components.<component>.certificate. The certificate definition may include the following entries:

  • keystore.type: Defines the type of the keystore. If you are using keystore, this value usually should be PKCS12. If you are using keyring, this value should be JCERACFKS.
  • keystore.file: Defines the path of the keystore file. If you are using keyring, this should look like safkeyring:////<keyring-owner>/<keyring-name>. For example, safkeyring:////ZWESVUSR/ZoweKeyring.
  • keystore.alias: represents the alias name of the certificate stored in keystore. If you are using keyring, this is the certificate label connected to the keyring.
  • keystore.password: Defines the password of the keystore.
  • trustStore.file: Defines the path to the truststore file. If you are using keyring, this should look like safkeyring:////<keyring-owner>/<keyring-name>, usually will be the same value of keystore.file.
  • trustStore.certificateAuthorities: defines extra certificate authorities you will trust. This should point to CA files in PEM format.
  • pem.key: Defines the private key file in PEM format. This can be used by applications that do not support either PKCS12 keystore format or z/OS keyring.
  • pem.certificate: Defines the public key file in PEM format. This can be used by applications that do not support either PKCS12 keystore format or z/OS keyring.
  • pem.certificateAuthority: Defines certificate authorities in PEM format. This can be used by applications that do not support either PKCS12 keystore format or z/OS keyring.

Note: With the zowe.yaml configuration, all certificate related configurations are merged into the zowe.yaml file. <keystore-dir>/zowe-certificates.env will not be used.

YAML configurations - zowe#

The high-level configuration zowe supports these definitions:

  • zowe.runtimeDirectory: Tells Zowe the runtime directory connected to this Zowe instance. This is equivalent to the ROOT_DIR variable in the instance.env file.

  • zowe.extensionDirectory: Tells Zowe where you put the runtime of all your extensions. This is equivalent to the ZWE_EXTENSION_DIR variable in the instance.env file.

  • zowe.jobPrefix: Defines the Zowe job prefix for the ZWESVSTC started task. This is equivalent to the ZOWE_PREFIX variable in the instance.env file.

  • zowe.identifier: Defines the Zowe job identifier for the ZWESVSTC started task. This is equivalent to the ZOWE_INSTANCE variable in the instance.env file.

  • zowe.externalDomains: Defines a list of external domains that will be used by the Zowe instance. This configuration is an array of domain name strings. This is equivalent to the ZWE_EXTERNAL_HOSTS variable in the instance.env file but should be represented as an array. In Sysplex deployment, this is the DVIPA domain name defined in Sysplex Distributor. For example,

    zowe:
    externalDomains:
    - external.my-company.com
    - additional-dvipa-domain.my-company.com

  • zowe.externalPort: Defines the port that will be exposed to external Zowe users. By default, this value is set based on the GATEWAY_PORT variable in the in the instance.env file. In Sysplex deployment, this is the DVIPA port defined in Sysplex Distributor. See Configure Sysplex Distributor for more information.

  • zowe.environments: Defines extra environment variables to customize the Zowe runtime. This configuration is a list of key / value pairs. This is equivalent to adding new environment variables to the instance.env file. For example,

    zowe:
    environments:
    MY_NEW_ENV: value-of-my-env

  • zowe.externalCertificate: Defines the northbound certificate facing Zowe users. These configurations are defined in <keystore-dir>/zowe-certificates.env.

    Note: This configuration is not the same as the EXTERNAL_CERTIFICATE configuration in zowe-setup-certificates.env. In zowe-setup-certificates.env, EXTERNAL_CERTIFICATE means that the certificate is not generated by the zowe-setup-certificates.sh utility script.

  • zowe.internalCertificate: Defines the default southbound certificate used within Zowe services. These configurations are defined in <keystore-dir>/zowe-certificates.env. By default, this is the same as zowe.externalCertificate.

  • zowe.sso.token.name: Defines SSO token name. This is equivalent to the PKCS11_TOKEN_NAME variable in <keystore-dir>/zowe-certificates.env.

  • zowe.sso.token.label: Defines the certificate label that binds to SSO token. This is equivalent to the PKCS11_TOKEN_LABEL variable in <keystore-dir>/zowe-certificates.env.

YAML configurations - java#

The high-level configuration java supports these definitions:

  • home: Defines the path to the Java runtime directory. This is equivalent to the JAVA_HOME variable in the instance.env file.

YAML configurations - node#

The high-level configuration node supports these definitions:

  • home: Defines the path to the Node.js runtime directory. This is equivalent to the NODE_HOME variable in the instance.env file.

YAML configurations - zOSMF#

The high-level configuration zOSMF supports these definitions:

  • zOSMF.host: Defines the hostname of your z/OSMF instance. This is equivalent to the ZOSMF_HOST variable in the instance.env file.
  • zOSMF.port: Defines the port of your z/OSMF instance. This is equivalent to the ZOSMF_PORT variable in the instance.env file.
  • zOSMF.applId: Defines the application ID of your z/OSMF instance. This is equivalent to the APIML_SECURITY_ZOSMF_APPLID variable in the instance.env file.

YAML configurations - components#

All Zowe components and extensions can have a dedicated section under the components high-level configuration.

In this section, <component> represents any Zowe components or extensions. For all components and extensions, these are the common definitions.

  • components.<component>.enabled: Defines if you want to start this component in this Zowe instance. This is a much detailed granular definition of the LAUNCH_COMPONENT_GROUPS variable in instance.env. This allows you to control each component instead of a group. For external components, also known as extensions, this configuration also replaces the EXTERNAL_COMPONENTS variable in instance.env.
  • components.<component>.certificate: you can customize a component to use different certificate from default values. This section follows same format defined in YAML configurations - certificate. If this is not customized, the component will use certificates defined in zowe.internalCertificate.

Configure component gateway#

These configurations can be used under the components.gateway section:

  • port: Defines the port which the gateway should be started on. This is equivalent to the GATEWAY_PORT variable in instance.env.
  • debug: Defines whether to enable debug mode for gateway. This is equivalent to the APIML_DEBUG_MODE_ENABLED variable in instance.env but with better granular level.
  • apiml.service.allowEncodedSlashes: When this parameter is set to true, the Gateway allows encoded characters to be part of URL requests redirected through the Gateway. This is equivalent to the APIML_ALLOW_ENCODED_SLASHES variable in instance.env.
  • apiml.service.corsEnabled: When this parameter is set to true, CORS are enabled in the API Gateway for Gateway routes api/v1/gateway/**. This is equivalent to the APIML_CORS_ENABLED variable in instance.env.
  • apiml.service.preferIpAddress: Set this parameter to true to advertise a service IP address instead of its hostname. Note: This configuration is deprecated. Zowe start script will ignore this value and always set it to false. This is equivalent to the APIML_PREFER_IP_ADDRESS variable in instance.env.
  • apiml.gateway.timeoutMillis: Specifies the timeout for connection to the services in milliseconds. This is equivalent to the APIML_GATEWAY_TIMEOUT_MILLIS variable in instance.env.
  • apiml.security.x509.enabled: Set this parameter to true to enable the client certificate authentication functionality through ZSS. This is equivalent to the APIML_SECURITY_X509_ENABLED variable in instance.env.
  • apiml.security.x509.externalMapperUrl: Defines the URL where Gateway can query the mapping of client certificates. This is equivalent to the APIML_GATEWAY_EXTERNAL_MAPPER variable in instance.env.
  • apiml.security.zosmf.applid: Defines the z/OSMF APPLID used for PassTicket. This is equivalent to the APIML_SECURITY_ZOSMF_APPLID variable in instance.env. This should have the same value of zOSMF.applId. This entry is kept for backward compatibility.
  • apiml.security.auth.provider: Defines the authentication provider used by the API Gateway. This is equivalent to the APIML_SECURITY_AUTH_PROVIDER variable in instance.env.
  • apiml.security.authorization.endpoint.url: Defines the URL to the authorization endpoint. This endpoint tells Gateway if a user has a particular permission on SAF profile. For example, permission to the APIML.SERVICES profile of ZOWE class. This is equivalent to the APIML_SECURITY_AUTHORIZATION_ENDPOINT_URL variable in instance.env.
  • apiml.security.ssl.verifySslCertificatesOfServices: Defines whether APIML should verify certificates of services in strict mode. Setting to true will enable the strict mode where APIML will validate if the certificate is trusted in turststore, and also if the certificate Common Name or Subject Alternate Name (SAN) matches the service hostname. This is equivalent to the VERIFY_CERTIFICATES variable defined in <keystore-dir>/zowe-certificates.env.
  • apiml.security.ssl.nonStrictVerifySslCertificatesOfServices: Defines whether APIML should verify certificates of services in non-strict mode. Setting the value to true will enable the non-strict mode where APIML will validate if the certificate is trusted in turststore, but ignore the certificate Common Name or Subject Alternate Name (SAN) check. Zowe will ignore this configuration when strict mode is enabled with apiml.security.ssl.verifySslCertificatesOfServices. This is equivalent to the NONSTRICT_VERIFY_CERTIFICATES variable defined in <keystore-dir>/zowe-certificates.env.
  • apiml.server.maxConnectionsPerRoute: Specifies the maximum connections for each service. This is equivalent to the APIML_MAX_CONNECTIONS_PER_ROUTE variable in instance.env.
  • apiml.server.maxTotalConnections: Specifies the total connections for all services registered under API Mediation Layer. This is equivalent to the APIML_MAX_TOTAL_CONNECTIONS variable in instance.env.

Configure component discovery#

These configurations can be used under the components.discovery section:

  • port: Defines the port which discovery should be started on. This is equivalent to the DISCOVERY_PORT variable in instance.env.
  • debug: Defines whether to enable debug mode for gateway. This is equivalent to the APIML_DEBUG_MODE_ENABLED variable in instance.env but with better granular level.
  • apiml.service.preferIpAddress: Set this parameter to true to advertise a service IP address instead of its hostname. Note: This configuration is deprecated. The Zowe start script will ignore this value and always set it to false. This is equivalent to the APIML_PREFER_IP_ADDRESS variable in instance.env.
  • apiml.security.ssl.verifySslCertificatesOfServices: Defines whether APIML should verify certificates of services in strict mode. Setting to true will enable the strict mode where APIML will validate both if the certificate is trusted in turststore, and also if the certificate Common Name or Subject Alternate Name (SAN) matches the service hostname. This is equivalent to the VERIFY_CERTIFICATES variable defined in <keystore-dir>/zowe-certificates.env.
  • apiml.security.ssl.nonStrictVerifySslCertificatesOfServices: Defines whether APIML should verify certificates of services in non-strict mode. Setting to true will enable the non-strict mode where APIML will validate if the certificate is trusted in turststore, but ignore the certificate Common Name or Subject Alternate Name (SAN) check. Zowe will ignore this configuration if strict mode is enabled with apiml.security.ssl.verifySslCertificatesOfServices. This is equivalent to the NONSTRICT_VERIFY_CERTIFICATES variable defined in <keystore-dir>/zowe-certificates.env.
  • alternativeStaticApiDefinitionsDirectories: Specifies the alternative directories of static definitions. This is equivalent to the APIML_MAX_CONNECTIONS_PER_ROUTE variable in instance.env.
  • apiml.server.maxTotalConnections: Specifies the total connections for all services registered under API Mediation Layer. This is equivalent to the ZWEAD_EXTERNAL_STATIC_DEF_DIRECTORIES variable in instance.env.

Configure component api-catalog#

These configurations can be used under the components.api-catalog section:

  • port: Defines the port which API Catalog should be started on. This is equivalent to the CATALOG_PORT variable in instance.env.
  • debug: Defines if we want to enable debug mode for gateway. This is equivalent to the APIML_DEBUG_MODE_ENABLED variable but with better granular level.
  • environment.preferIpAddress: Set this parameter to true to advertise a service IP address instead of its hostname. Note: This configuration is deprecated. Zowe start script will ignore this value and always set it to false. This is equivalent to the APIML_PREFER_IP_ADDRESS variable in instance.env.

Configure component caching-service#

These configurations can be used under the components.caching-service section:

  • port: Defines the port which Caching Service should be started on. This is equivalent to the ZWE_CACHING_SERVICE_PORT variable in instance.env.
  • debug: Defines if we want to enable debug mode for gateway. This is equivalent to the APIML_DEBUG_MODE_ENABLED variable in instance.env but with better granular level.
  • storage.mode: Sets the storage type used to persist data in the Caching Service. This is equivalent to the ZWE_CACHING_SERVICE_PERSISTENT variable in instance.env.
  • storage.size: Specifies amount of records before eviction strategies start evicting. This is equivalent to the ZWE_CACHING_STORAGE_SIZE variable in instance.env.
  • storage.evictionStrategy: Specifies eviction strategy to be used when the storage size is achieved. This is equivalent to the ZWE_CACHING_EVICTION_STRATEGY variable in instance.env.
  • storage.vsam.name: Specifies the data set name of the caching service VSAM data set. This is equivalent to the ZWE_CACHING_SERVICE_VSAM_DATASET variable in instance.env.
  • environment.preferIpAddress: Set this parameter to true to advertise a service IP address instead of its hostname. Note: this configuration is deprecated. Zowe start script will ignore this value and always set it to false. This is equivalent to the APIML_PREFER_IP_ADDRESS variable in instance.env.
  • apiml.security.ssl.verifySslCertificatesOfServices: Specifies whether APIML should verify certificates of services in strict mode. Set to true will enable strict mode that APIML will validate both if the certificate is trusted in turststore, and also if the certificate Common Name or Subject Alternate Name (SAN) match the service hostname. This is equivalent to the VERIFY_CERTIFICATES variable defined in <keystore-dir>/zowe-certificates.env.
  • apiml.security.ssl.nonStrictVerifySslCertificatesOfServices: Defines whether APIML should verify certificates of services in non-strict mode. Setting to true will enable non-strict mode where APIML will validate if the certificate is trusted in turststore, but ignore the certificate Common Name or Subject Alternate Name (SAN) check. Zowe will ignore this configuration if strict mode is enabled with apiml.security.ssl.verifySslCertificatesOfServices. This is equivalent to the NONSTRICT_VERIFY_CERTIFICATES variable defined in <keystore-dir>/zowe-certificates.env.

Configure component app-server#

These configurations can be used under the components.app-server section:

  • port: Defines the port which App Server should be started on. This is equivalent to the ZOWE_ZLUX_SERVER_HTTPS_PORT variable in instance.env.

Configure component zss#

These configurations can be used under the components.zss section:

  • port: Defines the port which ZSS should be started on. This is equivalent to the ZOWE_ZSS_SERVER_PORT variable in instance.env.
  • crossMemoryServerName: Defines the procedure name of cross memory server. This is equivalent to the ZOWE_ZSS_XMEM_SERVER_NAME variable in instance.env.
  • tls: Defines whether ZSS service has enabled TLS. This is equivalent to the ZOWE_ZSS_SERVER_TLS variable in instance.env.

Configure component jobs-api#

These configurations can be used under the components.jobs-api section:

  • port: Defines the port which Jobs API should be started on. This is equivalent to the JOBS_API_PORT variable in instance.env.

Configure component files-api#

These configurations can be used under the components.files-api section:

  • port: Defines the port which Files API should be started on. This is equivalent to the FILES_API_PORT variable in instance.env.

Configure component explorer-jes#

These configurations can be used under the components.explorer-jes section:

  • port: Defines the port which JES UI Explorer should be started on. This is equivalent to the JES_EXPLORER_UI_PORT variable in instance.env.
  • frameAncestors: Defines the frame ancestors supported by UI Explorer. This is equivalent to the ZOWE_EXPLORER_FRAME_ANCESTORS variable in instance.env but in better granular level.

Configure component explorer-mvs#

These configurations can be used under the components.explorer-mvs section:

  • port: Defines the port which MVS UI Explorer should be started on. This is equivalent to the MVS_EXPLORER_UI_PORT variable in instance.env.
  • frameAncestors: Defines the frame ancestors supported by UI Explorer. This is equivalent to the ZOWE_EXPLORER_FRAME_ANCESTORS variable in instance.env but in better granular level.

Configure component explorer-uss#

These configurations can be used under the components.explorer-uss section:

  • port: Defines the port which USS UI Explorer should be started on. This is equivalent to the USS_EXPLORER_UI_PORT variable in instance.env.
  • frameAncestors: Defines the frame ancestors supported by UI Explorer. This is equivalent to the ZOWE_EXPLORER_FRAME_ANCESTORS variable in instance.env but in better granular level.

Configure external extension#

You can define a components.<extension-id> section and use common component configuration entries.

For example, enable my-extension:

components:
# for extensions, you can add your definition like this
my-extension:
enabled: true

YAML configurations - haInstances#

All Zowe high availability instances should have a dedicated section under the haInstances high-level configuration.

In this section, <ha-instance> represents any Zowe high availability instance ID.

For all high availability instances, these are the common definitions.

  • haInstances.<ha-instance>.hostname: Defines the host name where you want to start this instance. This could be the host name of one LPAR in your Sysplex.
  • haInstances.<ha-instance>.ip: Defines the IP address where you want to start this instance. This could be the IP address of one LPAR in your Sysplex.
  • haInstances.<ha-instance>.components.<component>: Optional settings you can override component configurations for this high availability instance. See Configuration override for more details.

Hints and tips#

Learn about some hints and tips that you might find useful when you create and configure the Zowe instance.

When you are configuring Zowe on z/OS, you need to create certificates, and then create the Zowe instance.

The creation of a Zowe instance is controlled by the instance.env file in your instance directory INSTANCE_DIR.

  1. Keystore

    Edit the instance.env file to set the keystore directory to the one you created when you ran zowe-setup-certificates.sh.

    The keyword and value in instance.env should be the same as in zowe-setup-certificates.env, as shown below

    KEYSTORE_DIRECTORY=/my/zowe/instance/keystore

  2. Hostname and IP address

    The zowe-configure-instance.sh script handles the IP address and hostname the same way zowe-setup-certificates.sh does.

    In instance.env, you specify the IP address and hostname using the following keywords:

    ZOWE_EXPLORER_HOST=
    ZOWE_IP_ADDRESS=

    The ZOWE_EXPLORER_HOST value must resolve to the external IP address, otherwise you should use the external IP address as the value for ZOWE_EXPLORER_HOST.

    The zowe-configure-instance.sh script will attempt to discover the IP address and hostname of your system if you leave these unset.

    When the script cannot determine the hostname or the IP address, it will ask you to enter the IP address manually during the dialog. If you have not specified a value for ZOWE_EXPLORER_HOST, then the script will use the IP address as the hostname.

    The values of ZOWE_EXPLORER_HOST and ZOWE_IP_ADDRESS that the script discovered are appended to the instance.env file unless they were already set in that file or as shell environment variables before you ran the script.

On this page